|
http://www.axis.com/
This camera driver supports older MPEG4 cameras as well as newer H264 Cameras. |
Axis M3047-P |
CathexisVision Camera Integration |
Driver: |
Datasheet | |
Unicast | |
Number Of Cameras: | 1 |
Number Of Streams: | 4 |
Format: | H264/JPEG |
Transport: | RTP/UDP and RTP/TCP |
Audio: | N/A |
Resolution: | 4.1MP(2048×2048), 3.6MP(1920×1920), 2.9MP(1728×1728), 2.0MP (1920×1080), 1.4MP (1400×1050), 518kp(720×720), 409kP (854×480), 230kP (640×360) |
Multicast | |
Format: | H264 |
Audio: | N/A |
Resolution: | Stream Dependent |
Camera Events | |
Motion Detection | |
Trigger Message: | User defined |
Tamper Detection | |
Trigger Message | User defined |
I/O | |
Inputs: | N/A |
Outputs: | N/A |
Settings | |
Edge Recording : | Yes (Only Supported in CathexisVision 2019 and later) |
Serial Port: | N/A |
PTZ Control: | N/A |
Cathexis Software: | CathexisVision 2018 SP4 and later |
Camera Firmware: | V11.0 FP5 |
Notes: |
|
Limitations: |
|
Cathexis Integrations |