|
http://www.axis.com/
This camera driver supports older MPEG4 cameras as well as newer H264 Cameras. |
Axis P3707-PE |
CathexisVision Camera Integration |
Driver: |
Datasheet | |
Unicast | |
Number Of Cameras: | 4 |
Number Of Streams: | 4 |
Format: | H264/JPEG |
Transport: | RTP/UDP and RTP/TCP |
Audio: | N/A |
Resolution: | 2.0MP (1920×1080), 1.4MP (1400×1050), 1.2MP (1280×960), 0.9MP (1280×720), XGA (1024×768), 480kP (800×600), 409kP (854×480), 360kP (800×450), VGA (640×480), 230kP (640×360), 172kP (480×360), QVGA (320×240), 57kP (320×180), 43kP (240×180), 19kP (160×120) and 14kP (160×90) |
Multicast | |
Format: | H264 |
Audio: | N/A |
Resolution: | 2.0MP (1920×1080) |
Camera Events | |
Motion Detection | |
Zones: | 1 |
Trigger Message: | User defined |
I/O | |
Inputs: | N/A |
Outputs: | N/A |
Settings | |
Edge Recording : | Yes (Only Supported in CathexisVision 2019 and later) |
Serial Port: | N/A |
PTZ Control: | N/A |
Cathexis Software: | CathexisVision 2017 SP3 and later |
Camera Firmware: | 5.95.1.1 |
Limitations: |
To use cameras 2,3 and 4, you will need to change the “Video Input” in the “Connection tab” of the “Camera Setup”. By default video input is set to 1 but to get to the other camera you will need to change this to the number of the next camera. Eg.
|
Cathexis Integrations |