|
http://www.axis.com/
This camera driver supports older MPEG4 cameras as well as newer H264 Cameras. |
Axis Q1659 |
CathexisVision Camera Integration |
Driver: |
Datasheet | |
Unicast | |
Number Of Streams: | 4 |
Format: | H264/JPEG |
Transport: | RTP/UDP and RTP/TCP |
Audio: | Bi-Directional |
Resolution: | 19.9MP(5472×3648), 11.0MP(4080×2720), 6.9MP(3240×2160), 2.0MP(1920×1080), 1.7MP(1620×1080), 884kP(1152×768), 614kP(960×640), VGA(640×480) and 153kP(480×320) |
Multicast | |
Format: | H264 |
Audio: | Yes |
Resolution: | 19.9MP (5472×3648) |
Camera Events | |
Motion Detection | |
Zones: | 1 |
Trigger Message: | STARTMOTION, STOPMOTION |
Tamper | |
Trigger Message: | STARTTAMPER |
I/O | |
Inputs: | 2 |
Outputs: | 2 |
Settings | |
Edge Recording : | Yes |
Serial Port: | N/A |
PTZ Control: | N/A |
Cathexis Software: | CathexisVision 2018 and later |
Camera Firmware: | 6.45 |
Limitations: | The camera event configuration must be done through the System>>Plain Config>>>Motion Group. Once the motion area is configured the event can be configured to the specific recipient. |
Cathexis Integrations |