|
|
Unicast |
|
CathexisVision Driver: |
Bosch |
Number Of Cameras: |
1 |
Number Of Streams: |
2 |
Format: |
H.264/H.265/JPEG |
Transport: |
RTP/TCP and RTP/UDP |
Audio: |
Listen-only |
Resolution: |
2.0MP(1920×1080), 1.3MP (1526×864), 0.9MP(1280×720), 331kp(768×432), 147kp(512×288), 36kP (256×144) |
Multicast |
|
Format |
H.264/H/265 |
Audio |
Yes |
Resolution |
Stream Dependent |
|
|
Camera Triggers |
|
|
Motion Detection |
|
Tamper Detection |
|
Scene too bright |
|
Scene too dark |
|
Global Change |
|
Audio |
|
Flames (Supported, not tested) |
|
Smoke (Supported, not tested) |
|
Signal loss (Supported, not tested) |
|
Signal noise (Supported, not tested) |
|
Image blurry (Supported, not tested) |
I/O |
|
Inputs: |
1 inputs |
Outputs: |
1 output |
|
|
Settings |
|
Edge Review: |
Yes |
PTZ Control: |
N/A |
Cathexis Software: |
CathexisVision 2020 SP4 and later |
Camera Firmware Version |
7.62.0003 |
|
|
Limitations |
|
|
- H265 needs to be set in the web interface, then the Bosch v2 driver can be used.
- Transport type CatUDP does not working, its used for older cameras.
- Edge recording cannot be viewed when on different format to the recording (H264 cannot view H265 Edge recordings, visa versa).
|
|
|