| |
|
| Unicast |
|
| CathexisVision Driver: |
Bosch |
| Number Of Cameras: |
1 |
| Number Of Streams: |
2 |
| Format: |
H.264/H.265/JPEG |
| Transport: |
RTP/TCP and RTP/UDP |
| Audio: |
Listen-only |
| Resolution: |
2.0MP (1920×1080), 1.3MP (1536×864), 0.9MP (1280×720), 331kP (768×432), 147kP (512×288), 36kP (256×144) |
| Multicast |
|
| Format |
H.264/H/265 |
| Audio |
Yes |
| Resolution |
Stream Dependent |
| |
|
| Camera Triggers |
|
| |
Motion Detection |
| |
Tamper Detection |
| |
Scene too bright |
| |
Scene too dark |
| |
Global Change |
| |
Audio |
| |
Flames (Supported, not tested) |
| |
Smoke (Supported, not tested) |
| |
Signal loss (Supported, not tested) |
| |
Signal noise (Supported, not tested) |
| |
Image blurry (Supported, not tested) |
| I/O |
|
| Inputs: |
1 inputs |
| Outputs: |
1 output |
| |
|
| Settings |
|
| Edge Review: |
Yes |
| PTZ Control: |
N/A |
| Cathexis Software: |
CathexisVision 2020 SP4 and later |
| Camera Firmware Version |
6.41.0037 |
| |
|
| Limitations |
|
| |
- H265 needs to be set in the web interface, then the Bosch v2 driver can be used.
- Transport type CatUDP does not working, its used for older cameras.
- Edge recording cannot be viewed when on different format to the recording (H264 cannot view H265 Edge recordings, visa versa).
|
| |
|
