| Datasheet |
|
| |
| Unicast |
|
| Number Of Streams : |
2 |
| Format : |
H264/JPEG |
| Transport : |
Default, RTP/TCP and RTP/UDP |
| Audio : |
Listen only |
| Resolution : |
2.0MP (1920×1080), 0.9MP (1280×720), 230kP (640×360) and 112kP (448×252). |
| |
|
| Multicast |
|
| |
N/A |
| |
|
| Camera Events |
| Motion Detection : |
Yes |
| Zones : |
1 |
| Trigger Message : |
STARTMOTION, STOPMOTION |
| |
|
| I/O |
|
| Inputs : |
4 |
| Outputs : |
1 |
| |
|
| Settings |
|
|
Edge Review :
|
Not supported |
| Serial Port : |
N/A |
| PTZ Control : |
Yes |
| Cathexis Software : |
CathexisVision 2017.SP2 and later |
| Camera Firmware : |
v1.08 2015-07-20 |
| Limitations : |
- Audio out is not supported.
- When Input 1 is triggered the camera reports to CathexisVision that all four inputs have been triggered. If the other inputs are triggered the camera doesn’t report anything.
- Disabling IO polling will improve the live streaming and recording performance.
- Review on a Linux unit can be erratic when audio is enabled. Review on a Windows NVR, or Client works correctly.
- If a H264 stream is set to 50fps the live view will be streamed at 25fps, and the recording will be at 50fps.
- If a JPEG stream is set to 50fps the live view and recording will both be at 25fps.
|
