Huawei M2150-10-EGI |
CathexisVision Camera Integration |
Driver: |
 |
| Datasheet | ||
| Unicast | ||
| CathexisVision Driver: | Huawei | |
| Number Of Cameras: | 1 | |
| Number Of Streams: | 3 | |
| Format: | H.265/H.264/JPEG | |
| Transport: | RTP/TCP and RTP/UDP | |
| Audio: | Not Supported | |
| Resolution: | 5MP (2560×1920), 4MP (2560×1440), 3MP (2048×1536), 2MP (1920×1080),928.8KP (1290×720),414.7KP (720×576), 345.6KP (720×480), 93.6KP (352×288), 78KP (352×240) | |
| Multicast | ||
| Multicast: | Not Supported | |
| Camera Triggers | ||
| Motion detection | ||
| Trigger Message | VideoSource/MotionAlarm | |
| Occlusion | ||
| Trigger Message | VideoAnalytics/MaskAlarm | |
| Defocus detection | ||
| Trigger Message | VideoSource/ImageTooBlurry/ImagingService/td> | |
| Temperature Alarm | ||
| Trigger Message | Monitoring/EnvironmentalConditions/TemperatureCritica Device/HardwareFailure/TemperatureCritical |
|
| I/O | ||
| Inputs: | Not Supported | |
| Outputs: | Not Supported | |
| Settings | ||
| Edge Review: | Supported | |
| PTZ Control: | N/A | |
| Cathexis Software: | CathexisVision 2022 SP2 and later | |
| Camera Firmware: | SDC 8.0.2.SPC100 | |
| Cathexis Integrations |
