Mobotix C26 |
CathexisVision Camera Integration |
Driver: |
Datasheet | |
Unicast | |
CathexisVision Driver: | Mobotix V2 |
Number Of Cameras: | 1 |
Number Of Streams: | 4 |
Number Of Video Inputs: | 6 – Inputs changes the layout of the stream. |
Format: | MxPEG/H264/JPEG |
Transport: | RTP/TCP and RTP/UDP |
Audio: | Bi-Directional |
Resolution: | 6.2MP (3072×2048), 5.0MP (2592×1944), 3.1MP (2048×1536), 2.0MP (1920×1080), 1.2MP (1280×960), 0.9MP (1280×720), XGA (1024×768), 480kP (800×600), 442kP (768×576), 4CIF (704×576), VGA (640×480), 110kP (384×288), CIF (352×288), QVGA (320×240) and 19kP (160×120) |
Multicast | |
Format: | H264 |
Audio: | Listen Only |
Resolution: | 6.2MP (3072×2048) |
Camera Events | |
Motion Detection | |
Zones: | 2 |
Trigger Message: | VM, VM2 |
MxActivity Sensor | |
Trigger Message: | AS |
Audio Detection | |
Trigger Message: | MI |
I/O | |
Inputs: | N/A |
Outputs: | N/A |
Settings | |
Edge Review: | Not Supported. |
Serial Port: | N/A |
PTZ Control: | Not Supported |
Cathexis Software: | CathexisVision 2018 SP3 and later |
Camera Firmware: | 4.6.0-rc5+ |
Limitations: | |
Cathexis Integrations |