Bosch NTI – 50022 – A3S |
CathexisVision Camera Integration |
Driver: |
Datasheet | |
Unicast | |
Number Of Streams : | 2 |
Format : | H264/JPEG |
Transport : | RTP/UDP and RTP/TCP |
Audio : | Listen Only |
Resolution : | 2.0MP (1920×1080), 0.9MP (1280×720), 4CIF (704×480), 331kP (768×432), 147kP (512×288), CIF (352×240) and QCIF (176×144) |
Multicast | |
Format : | H264 |
Resolution : | Stream Dependent |
Audio : | Listen Only |
Camera Events | |
Type : | Motion Detection / Audio Alarms |
Motion Detection Zone : | 1 |
Motion Detection Trigger Message : | STARTMOTION |
Audio Alarm Zones : | 15 |
Audio Alarm Trigger Messages : | AUDIO, AUDIO_ENTIRE, AUDIO_3.4kHz, AUDIO_2.9kHz, AUDIO_2.4kHz, AUDIO_2.0kHz, AUDIO_1.7kHz, AUDIO_1.4kHz, AUDIO_1.1kHz, AUDIO_880Hz, AUDIO_680Hz, AUDIO_500Hz, AUDIO_350Hz, AUDIO_200Hz and AUDIO_100Hz. |
I/O | |
Inputs : | 1 |
Outputs : | 1 |
Settings | |
Serial Port : | N/A |
PTZ Control : | N/A |
Cathexis Software : | CatVision 2016.SP3 and later |
Camera Firmware : | 06.22 |
Limitations : | JPEG streams at a low frame rate irrespective of the frame rate set by the user. This is a camera limitation. |
Cathexis Integrations |