Panasonic WV-X6531N |
CathexisVision Camera Integration |
Driver: |
 |
| Datasheet | |
| Unicast | |
| Number Of Streams: | 4 |
| Format: | H265/H264/JPEG |
| Transport: | RTP/UDP and RTP/TCP |
| Audio: | Bi-Directional |
| Resolution: |
Note : Resolutions shown are base on capture mode selected. 3.1MP(2048×1536), 1.2MP(1280×960), 480kp(800×600), VGA(640×480), 120kp(400×300), QVGA(320×240) |
| Capture Mode | 3m/ 2m_r16_9_60fps/ 2m_16_9 |
| Multicast | |
| Format: | N/A |
| Audio: | N/A |
| Resolution: | N/A |
| Camera Events | |
| Motion Detection | YES |
| Zones: | 4 |
| Trigger Message: |
STARTMOTION |
| Audio Detection | YES |
| Trigger Message: | STARTAUDIO |
| I/O | |
| Inputs: | 3 |
| Outputs: |
1 |
| NOTE: | If you want to use the Alarm Output you must select the AUX Output in terminal 3 on the web interface, not Alarm Output. |
| Settings | |
| Edge Review: | Yes |
| Serial Port: | N/A |
| PTZ Control: | Yes |
| Cathexis Software: | CathexisVision 2018 SP3 and later |
| Camera Firmware: | 1.82 |
| Limitations: | Multicast is not working |
| Cathexis Integrations |
