Datasheet |
|
Unicast |
|
CathexisVision Driver: |
ONVIF V2 |
Number Of Cameras: |
1 |
Number Of Streams: |
3 |
Format: |
H.265/H.264/JPEG |
Transport: |
RTP/TCP and RTP/UDP |
Audio: |
Bidirectional |
Max Resolution: |
4K (1920 x 1080) |
|
|
Multicast |
|
Format: |
H.264 |
Audio: |
Yes |
Resolution: |
(1920 x 1080), (1280 x 720), (896 x 504), (640 x 360) |
|
|
Camera Triggers |
|
Motion Detection |
|
Trigger Message: |
MOTIONDETECTION |
Sabotage Detection |
|
Trigger Message: |
SABOTAGEDETECTION |
Abandoned Object |
|
Trigger Message: |
ABANDONEDOBJECT |
Adaptive Motion |
|
Trigger Message: |
ADAPTIVEMOTION |
Object Counting |
|
Trigger Message: |
OBJECTCOUNTING |
Object Removal |
|
Trigger Message: |
OBJECTREMOVAL |
Loitering Detection |
|
Trigger Message: |
LOITERINGDETECTION |
Stopped Vehicle |
|
Trigger Message: |
STOPPEDVEHICLE |
|
|
I/O |
|
Inputs: |
4 |
Outputs: |
2 |
|
|
Settings |
|
Edge Review: |
Supported |
PTZ Control: |
Digital/Optical Zoom |
Cathexis Software: |
CathexisVision 2022 SP2 and later |
Camera Firmware: |
3.8.0.13.9350-A0.0 |
|
|
Notes |
|
|
- The camera’s audio is disabled by default. You need to login into the camera’s web interface to enable it.
- Scene settings will only be available after you have configured preset/s.
- Pelco provides additional analytical behaviours that are not part of the Cathexis standard VMS triggers but you can still view analytic events and review their trigger history through Cathexis.
- The analytic behaviour/s available to your camera are dependent on your model and firmware version.
- While testing, we discovered that the CPU usage was higher without smart compression enabled. Enabling the smart codec setting resolved this issue.
|
Limitations |
|
|
- Audio out is not supported on the ONVIF V2 driver.
|
|
|