| Datasheet |
|
| Unicast |
|
| CathexisVision Driver: |
ONVIF V2 |
| Number Of Cameras: |
1 |
| Number Of Streams: |
3 |
| Format: |
H.265/H.264/JPEG |
| Transport: |
RTP/TCP and RTP/UDP |
| Audio: |
Two-way |
| Max Resolution: |
12MP (2048 x 1536) |
| |
|
| Multicast |
|
| Format: |
H264 |
| Audio: |
Yes |
| Resolution: |
Stream Dependent |
| |
|
| Camera Triggers |
|
| 2-Camera Tracking |
|
| Trigger Message |
2-CAMERATRACKING |
| Abandoned Object |
|
| Trigger Message |
ABANDONEDOBJECT |
| Directional Motion |
|
| Trigger Message |
DIRECTIONALMOTION |
| Adaptive Motion |
|
| Trigger Message |
ADAPATIVEMOTION |
| Object Counting |
|
| Trigger Message |
OBJECTCOUNTING |
| Object Removal |
|
| Trigger Message |
OBJECTREMOVAL |
| Loitering Detection |
|
| Trigger Message |
LOITERINGDETECTION |
| Camera Sabotage |
|
| Trigger Message |
CAMERASABOTAGE |
| |
|
| I/O |
|
| Inputs: |
1 |
| Outputs: |
1 |
| |
|
| Settings |
|
| Edge Review: |
Supported |
| PTZ Control: |
Optical Zoom |
| Cathexis Software: |
CathexisVision 2022 SP2 and later |
| Camera Firmware: |
2.13.6.1.8360-A0.0 |
| |
|
| Notes |
|
| |
- This camera needs to be set to use Tiled H.264 in Setting > System > Optera Compatible Mode from the web interface.
- The panoramic view will then be split into three separate cameras that can be added.
|
| |
|
| Limitations |
|
| |
- Edge recording is not supported.
- Audio out is not supported on the ONVIF V2 driver.
|
| |
|
