Pelco Sarix IXP51 |
CathexisVision Camera Integration |
Driver: |
Datasheet | |||||||
Unicast | |||||||
Number Of Streams : | 2 | ||||||
Format : | H264 | ||||||
Audio : | Not Supported | ||||||
Resolution : | 5.0MP (2592×1944), 3.1MP (2048×1536), 2.0MP (1920×1080), 1.9MP (1600×1200), 1.2MP (1280×960), 0.9MP (1280×720), 589kP (1024×576), 480kP (800×600), VGA (640×480), QVGA (320×240) and 57kP (320×180) | ||||||
Multicast | |||||||
Not Supported | |||||||
Motion Detection | |||||||
Not Available (On Board) | |||||||
I/O | |||||||
Not Supported | |||||||
Settings | |||||||
Cathexis Software : | CatVision 2014 Service Pack 3 and later | ||||||
Camera Firmware : | 03.21 | ||||||
Limitations | |||||||
The resolutions are setup on the web interface of the camera. |
|||||||
|
Cathexis Integrations |