http://www.acti.com/

This integration was intended to support the older Acti acti SED2610 multi-channel MPEG-4 encoder.

Acti SED2610
CathexisVision Camera Integration
Driver:


Unicast  
Number Of Channels :  8
Number Of Streams : 1
Format : MPEG4
Audio : Not Supported
Resolution : 4CIF
   
Multicast  
Audio : Not Supported
Format : MPEG4
Resolution : 4CIF
   
Camera Events  
Trigger : 1 Zones
String : STARTMOTION / STOPMOTION
   
Settings  
PTZ Control : Yes
Cathexis Software : 5042b2 and Later
Camera Firmware :  Version Unknown                                                      
Limitations : 

To use cameras 2,3 and 4, you will need to change the “Video Input” in the “Connection tab” of the “Camera Setup”. By default video input is set to 1 but to get to the other camera you will need to change this to the number of the next camera.

Eg.

    • Video Input : 1 is camera one
    • Video Input : 2 is camera two etc.

 

Cathexis Integrations