Datasheet |
|
|
Unicast |
|
CathexisVision Driver : |
Samsung V2 |
Number Of Streams : |
Up to 10 |
Format : |
H264/MJPEG |
Transport : |
Default, RTP/TCP and RTP/UDP |
Audio : |
Listen only |
Resolution : |
2.0MP (1920×1080), 1.2MP (1280×960), 0.9MP (1280×720), XGA (1024×768), 480kP (800×600), D1 (720×576), VGA (640×480), QVGA (320×240). |
|
|
Multicast |
|
|
Yes |
|
|
Camera Events |
Motion Detection : |
Yes |
Zones : |
1 |
Trigger Message : |
STARTMOTION |
|
|
Tampering Detection : |
Yes |
Trigger Message : |
STARTTAMPER |
|
|
I/O |
|
Inputs : |
N/A |
Outputs : |
N/A |
|
|
Settings |
|
Edge Review :
|
Not supported |
Serial Port : |
N/A |
PTZ Control : |
N/A |
Cathexis Software : |
CathexisVision 2017.SP2 and later |
Camera Firmware : |
v1.01_150918 |
Notes : |
- The format of the first two profiles cannot be changed as it is set on the camera.
- When setting up a stream using Live555 it may take up to 15 seconds for the live stream and audio to syncronize. The recordings during this time are correct.
- Audio in via onboard mic works. Can set driver to use either Line in, External mic, or Internal mic.
- Hallway view works and is recorded correctly.
- Analytics streams can be configured.
|
|
|
Limitations : |
- The camera presents CathexisVision with ten possible video feeds to configure, but may not be able to use all of them.
- The camera will not allow more than two simultaneous video feeds to be used by a single CathexisVision server.
- The camera will report to CathexisVision that a framerate of 5FPS can be used for all resolutions in the first video feed, but the web interface shows that for higher resolutions only framerates less than 5FPS can be set. When editing the camera, the settings won’t be saved if an unsupported framerate is selected.
- Review on a Linux unit can be erratic when audio is enabled. Review on a Windows unit, or client is fine.
|