|
|
http://www.sony.com/
This integration supports the Sony SNC H.264 cameras. The cameras should be updated to the latest firmware version available from Sony before installation. Since the camera range is continually expanding, there is the possibility that new models might require some further modifications to the driver. Please raise any support queries with [email protected] |
Sony SNC – EM632RC |
CathexisVision Camera Integration |
Driver: |
 |
| Datasheet | |
| Unicast | |
| CathexisVision Driver: | Sony |
| Number Of Cameras: | 1 |
| Number Of Streams: | 2 |
| Format: | H264/MJPEG |
| Transport: | RTP/TCP and RTP/UDP |
| Audio: | N/A |
| Resolution: | 2.0MP (1920×1080), 0.9MP (1280×720), 589kP (1024×576), D1 (720×576), VGA (640×480), 230kP (640×360), CIF (352×288) and 58kP (320×184 |
| Multicast | |
| N/A | |
| Camera Events | |
| Motion Detection: | |
| Zones: | 4 |
| Trigger Message: | STARTMOTION_1, STARTMOTION_2, STARTMOTION_3 and STARTMOTION_4 |
| Tamper Detection: | |
| Trigger Message: | TAMPER |
|
Face Detection: |
|
|
Trigger Message: |
VMF |
| I/O | |
| Inputs: | N/A |
| Outputs: | N/A |
| Settings | |
| Edge Review: | Not Supported. |
| Serial Port: | N/A |
| PTZ Control: | N/A |
| Cathexis Software: | CathexisVision 2017 SP3 and later |
| Camera Firmware: | 2.8.0 |
| Limitations: | |
| Cathexis Integrations |
