http://www.acti.com/

This integration was intended to support the older Acti acti SED2610 multi-channel MPEG-4 encoder.

Acti T-Series Encoder
CathexisVision Camera Integration
Driver:


Unicast  
Number Of Streams :   1
Format : H.264/MPEG-4/MJPEG
Audio : Not Supported
Resolution : Camera dependent
   
Multicast  
Audio : Not Supported
Format : H.264/MPEG-4
Resolution : Camera Dependent
   
Camera Events  
Trigger : 1 Zones
String : STARTMOTION 1/2/3
   
Settings  
PTZ Control : Yes Implemented, but not tested. Support PTZ and presets.
Cathexis Software : 5042d1 and Later
Camera Firmware : V4.09 4.
Limitation :

    • Event triggers only available on firmware version 4.09 and above.
    • PTZ Control has been integrated, but not tested
    • Multicast channel setups link directly to the unicast channel setups
    • Multicast IS only available on channels that have H.264/MPEG-4 streams.
    • Multicast worked on firmware V4.08,with some start/stop issues.
    • On firmware V4.09 there are a lot of issues with the multicast RTSP session, mostly due to Acti not following the industry norm of how a RTSP session will work.
    • Do not use firmware versions lower than V4.08!

 

Cathexis Integrations