| |
Datasheet |
|
| |
| Unicast |
|
| CathexiVision Driver: |
truVision V2 |
| Number Of Cameras: |
1 |
| Number Of Streams: |
2 |
| Format: |
H264/JPEG |
| Transport: |
RTP/UDP and RTP/TCP |
| Audio: |
Yes |
| Resolution: |
2.0MP (1920×1080),1 .2MP (1280×960), 0.9MP (1280×720) |
| |
|
| Multicast |
|
| Format: |
H264 |
| Audio: |
N/A |
| Resolution: |
2.0MP (1920×1080), 1.2MP (1280×960), 0.9MP (1280×720) |
| |
|
| Camera Events |
| Motion Detection |
Yes. See limitations |
| Zones: |
1 |
| Trigger Message: |
STARTMOTION |
| |
|
| I/O |
|
| Inputs: |
Yes. 1 Input |
| Outputs: |
Yes. 1 Output |
| |
|
| Settings |
|
| Edge Recording : |
Not Supported. |
| Serial Port: |
N/A |
| PTZ Control: |
N/A |
| Cathexis Software: |
CathexisVision 2017 SP3 and later |
| Camera Firmware: |
V3.0 FP8 |
| Limitations: |
- There are 16 STARTMOTION areas. Only 8 areas can be configured, but only 1 area triggers.This is a limitation on the truvision firmware
|
| |
|
