Samsung QND-7080RP |
Integration
CathexisVision Version: 2017 SP2 ++
Firmware: 1.00_160804
Tested: Yes
Image
Technology Partner
Samsung
Description
Notes:
The format of the first three profiles cannot be changed as it is set on the camera.
When setting up a stream using Live555 (RTP/TCP, or RTP/UDP) it may take up to 15 seconds for the live stream and audio to syncronize. The recordings during this time is correct.
Limitations:
H265 has not been tested, but is supported from CathexisVision 2017.3.
Edge review is not supported
The camera presents CathexisVision with ten possible video feeds to configure, but may not be able to use all of them.
The camera will report to CathexisVision that a framerate of 5FPS can be used for all resolutions in the first video feed, but the web interface shows that for higher resolutions only framerates less than 5FPS can be set. When editing the camera, the settings won’t be saved if an unsupported framerate is selected.
Camera doesn’t support auto focus.
The camera doesn’t always stream the first video feed according the framerate set.
Camera Details
Type:
Camera
Camera
Channels:
1
1
Streams:
10
10
Protocol:
Native
Native
Multicast:
Yes
Yes
Audio:
Listen only
Listen only
Edge Insertion:
No
No
VMD:
Yes
Yes
Transport:
RTP/TCP
RTP/UDP
Codex:
H265
H264
MJPEG
PTZ Control:
Zoom in/out and Focus near/far
Zoom in/out and Focus near/far
Edge Review:
No
No
Resolution: 3.9MP (2592×1520), 3.6MP (2560×1440), 2.9MP (2304×1296), 2.0MP (1920×1080), 1.3MP (1280×1024), 1.2MP (1280×960), 0.9MP (1280×720), XGA (1024×768), 480kP (800×600), D1 (720×576), 358kP (800×448), D1 (720×480), VGA (640×480), 230kP (640×360), QVGA (320×240)
Camera Events
Camera Events
Motion Detection: Yes
Zones: 1
Trigger Message: STARTMOTION
Tamper Detection: Yes
Trigger Message: STARTTAMPER
Defocus Detection: Yes
Trigger Message: STARTDEFOCUS
Input / Output
Inputs:
1
1
Outputs:
1
1
